86125 UV Light Meter +UVCWP-X1 Probe
Suitable for the testing of high-power germicidal lamp in water treatment industry
Spectral response: 230nm-280nm, λp = 254nm
Waterproof, the probe can be submerged to the depth of 1 meter
Large power range , the maximum measurement power up to 200000μW/cm²
The 86125 UV light meter is a smart host that can support 9 different types of probes. Its main function is data display. The UVCWP-X1 probe is one of the 9 probes equipped with the 86125 host. The probe's spectral response range is 230nm-280nm, the peak wavelength is 254nm. This UV radiometer is waterproof to 1 meter deep. It is a probe specially developed for water treatment high-power germicidal lamps.
Parameters
| Parameters | UVCWP-X1 Probe |
|---|---|
| Spectral response | 230nm-280nm, λp = 254nm |
| Power measuring range | 0 - 200000μW / cm² |
| Resolution | 0.1μW / cm² |
| Energy measuring range | 0-9999999μJ/cm² |
| Record time | 0-99999s |
| Measuring accuracy | ±10% |
| Sampling speed | 6 times/second |
| Unit | μW / cm² (default), mW / cm², W / m² |
| Test Hole Diameter | ￠=10mm |
| Probe size | Diameter 50mm × thickness 20mm |
| Waterproof depth | 1m |
| Packing box dimension | 24 * 6 * 5 cm (L * W * H) |
Features
Waterproof
The probe is waterproof and the waterproof depth can reach 1 meter
Excellent digital probe technology
Adopting advanced digital probe technology, all data collection and processing are completed inside the probe. Data transmission through digital signals with stronger anti-interference ability can ensure more stable test data
Large power range , the maximum measurement power can reach 200000μW/cm²
Large-scale measurement, the maximum power can be measured to 200,000 μW / cm²
Data Statistics
The probe can intelligently statistics the real-time value, maximum value, minimum value and average value of the power, record the measurement time.All these values can be displayed in the screen at the same time
Units are available
Three measurement units can be switched, namely μW/cm², mW / cm², W / m². Data conversion between different units does not require manual calculation
FAQ
-
1. The difference between UVC-X0, UVCWP-X1 and UVCLED-X0 UV probes for 86125 UV light meter host
UVC-X0 and UVCWP-X1 probes are suitable for detecting 254nm low-pressure mercury germicidal lamps, while UVCLED-X0 is suitable for UVC LED light source; the UVCWP-X1 probe is a waterproof probe with 1m waterproof depth.
-
2. Whether a traceable calibration certificate is included?
UVC-X0 and UVCWP-X1 are mainly used to detect 254nm low-pressure mercury germicidal lamps, which can be ensured to pass the inspection of the Metrology Institute and obtain a calibration certificate (approved by CNAS and ilac-MRA). The cost of the calibration certificate is about US$200 ; but the UVCLED-X0 probe is professionally used to detect UVC LED light sources. There is no unified inspection standard for LED light sources, each light source and UV energy meter manufacturer has their own calibration standards. We can provide the factory calibration reports for UVCLED-X0 probe, but no calibration certificates can be provided.
-
3. What's the working temperature of the UV probes?
The 9 probes of the 86125 UV light meter are not heat-resistant. The probe can be used for a long time at 80℃ or lower. If the temperature is higher than 80℃, it is recommended to use UV energy meter for UVA light source detection.