86128 UV Energy Meter
Special for UV LED (365, 385, 395, 405nm, etc.)
UV intensity measuring range of 40000 mW/cm²
Record UV intensity, energy, temperature and curing time together
Provide PC software
86128 is a professional UV energy meter for testing UV LED light sources and has various excellent achievements:
The first UV energy meter for UV LED light source testing.
The first wide-range UV energy meter with a range of 40W/cm².
The first UV energy meter for a wide spectrum (340nm-420nm).
The first UV energy meter that measures temperature and power at the same time and can display process curves.
Its spectral response range is 340nm-420nm and it can test various wavelengths of 365nm, 375nm, 385nm, 395nm, 405nm and other UV LED light source.
Parameters
| Parameter | 86128 UV Energy Meter |
|---|---|
| Application | Light intensity, energy and temperature measurement of UV LED light sources |
| Spectral Range | 340nm - 420nm, calibrated at 395nm UV LED light sources |
| Irradiance Measuring Range | 0 - 40000 mW/cm² |
| Irradiance Resolution | 1 mW/cm² |
| Energy Measuring Range | 0 - 999999 mJ/cm² |
| Energy Measuring Accuracy | ± 10% , ± 5% (typical) |
| Temperature Measuring Range | -55°C -125°C |
| Sampling Speed | 2048 times/second |
| Irradiance Data Storage Interval | 32 times/second |
| Temperature Data Storage Interval | 2 times/second |
| Recording Period | 32 min |
| Power Supply | 2 AAA alkaline dry batteries |
| Display | 240*160 Dot matrix LCD |
| Test Hole Diameter | ￠10mm |
| Dimension | Diameter 120mm * Thickness 13mm |
| Weight | 327g |
Feature
Two measurement modes available
There are two measurement modes. One is Manual mode which needs to start up or end of measurement manually. Another is automatic modes that can automatic switch-on or end of measurement when the energy intensity emitted by the light source is above or below the trigger threshold that can be set
Four interfaces help you record the data of UV light source
There are four interfaces to help you know better about UV light source you tested: In maximum values interface, you can acquire cumulative energy value, maxiumum power value and maximum temperature value. Measurement time can be recorded in RT interface. In temperature and power curve interface, you can know the temperature change and energy intensity variation of the light source. Four interfaces can be switched freely
Wide spectral response range
With wide spectral response range, the UV power puck can test UV LED light source with any peak in the range of 365nm-405nm
Powerful PC software
The 86128 UV Energy Meter can be connected to PC software, which allows you to generate reports and print out test results, as well as to export test data
Temperature measurement possible
The high-precision and fast-response temperature detector is used to measure the actual temperature in the curing machine
High temperature resistant
High temperature resistant design with built-in heat insulation sheet, it can run in the environment of 100 degrees Celsius for a long time. Click for more: Use Time of Linshang UV Energy Meter at Different High Temperature
High-speed data acquisition of 2048 times/sec, more accurate measurement
Built-in timer can accurately record the UV curing time
The stored data will not lost when the power is turned off
Packing
| No | Description | Quantity | Unit |
|---|---|---|---|
| 1 | 86128 UV Energy Meter | 1 | pcs |
| 2 | USB Able | 1 | pcs |
| 3 | AAA Battery | 2 | pcs |
| 4 | Antistatic Gloves | 1 | pcs |
| 5 | Cross Head Screw-driver | 1 | pcs |
| 6 | User Manual | 1 | pcs |
| 7 | Certificate/Warranty Card | 1 | pcs |
| 8 | Plastic Box Dimension 25*21*7cm (L*W*H) | 1 | pcs |
FAQ
-
1. The difference between 86120 and 86128 UV energy meters
86120 UV energy meter is mainly used to detect 365nm UV high pressure mercury lamp, while 86128 UV energy meter is mainly used to detect 365nm, 385nm, 395nm and 405nm UV LED light sources.
-
2. Whether a traceable calibration certificate is included?
86120 and 86136 are professional UV energy meters used to detect 365nm high-pressure mercury lamps, which can be ensured to pass the inspection of the Metrology Institute and obtain a calibration certificate (approved by CNAS and ilac-MRA). The cost of the calibration certificate is about US$200 ; 86128 and 86137 are UV energy meters that are professionally used to detect UV LED light sources. There is no unified inspection standard for LED light sources, each light source and UV energy meter manufacturer has their own calibration standards. We can provide the factory calibration reports for these two UV LED energy meters, but no calibration certificates can be provided.
-
3. How to calibrate UV energy meter, how often do I need to calibrate and how much does it cost?
To calibrate the UV energy meter, please send the instrument back to the manufacturer. Generally, it is recommended to calibrate it once a year. If the storage environment is good and the frequency of use is not high, the calibration period can also be extended according to user needs. The first calibration is free, and the cost of each subsequent calibration is US $32.